Sign In | Join Free | My himfr.com
himfr.com

Guangzhou Star Mustang Construction Machinery Parts Co., Ltd

With professional technology and sincere service, we have been respected by customers from the very beginning and enjoy a good reputation in the industry. At present, we have established a scientific

Verified Supplier

4 Years

Home > ENGINE OIL PUMP >

6D16 ME074345 High Pressure Oil Pump For MITSUBISHI

Guangzhou Star Mustang Construction Machinery Parts Co., Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers
     
    Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers
    • Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers
    • Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers
    • Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers
    • Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers
    • Buy cheap 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI from wholesalers

    6D16 ME074345 High Pressure Oil Pump For MITSUBISHI

    Ask Lasest Price
    Brand Name : HDPARTS
    Model Number : 6D16
    Price : Looking forward to your inquiry
    Payment Terms : T/T, Western Union, MoneyGram,HSBC
    Supply Ability : 1000 Piece/Pieces per Month
    Delivery Time : 2-5 work days
    • Product Details
    • Company Profile

    6D16 ME074345 High Pressure Oil Pump For MITSUBISHI

    6D16 Engine Oil Pump ME074345 Suitable For MITSUBISHI Diesel Engines Parts


    Specification

    Applicable models6D16
    Typeoil pump 59T
    Original numberME074345
    Warranty6 months
    Engine TypeDiesel
    Brand NameHDPARTS
    ConditionNew
    SizeOEM Size

    Mechanical installation

    Installation instructions

    1. The installation of the pump has a very important impact on the stable operation and service life of the pump. Therefore, the installation and calibration must be carried out carefully and no haste is allowed.

    2. The installation height, length and diameter of the suction pipe of the pump shall meet the calculated value and try to be brief to reduce unnecessary losses (such as elbows); And ensure that the allowable NPSH of the pump is not exceeded during operation.

    3. Suction and discharge lines shall have brackets. The pump is not allowed to bear the load of the pipeline.

    4. The place where the pump is installed shall be spacious enough to facilitate maintenance.

    Installation sequence

    1. Place the unit on the foundation with embedded anchor bolts, and use pairs of wedge pads between the base and the foundation for correction.

    2. Loosen the coupling shaft, place it on the pump shaft and the base with a level gauge, adjust the wedge pad to correct the level of the unit, and properly tighten the anchor bolts to prevent moving.

    3. Correct the concentricity of pump shaft and motor shaft, and the allowable deviation is 0.1mm on the outer circle of coupling road; The clearance between the two coupling planes shall be 2-4 mm (the smaller value is taken for the small pump), and the clearance shall be uniform with a tolerance of 0.3 mm.

    4. After connecting the pipeline and determining the rotation direction of the motor, connect the coupling and check the concentricity of the shaft again.

    5. After the actual test run of the unit for 2-3 hours, the final inspection shall be conducted. If there is no adverse phenomenon, the installation is considered to be qualified. During the test run, check the temperature and vibration of the bearing as follows:

    6. In order to prevent sundries from falling into the machine during installation, all holes of the unit shall be covered.

    7. In order to prevent sundries in the pipeline from entering the pump, a filter shall be installed on the pump rubber of the newly installed pipeline, and its effective section shall be 2-3 times larger than that of the suction pipe.


    Product Description


    Company Information

    PRODUCT CATEGORIES

    1570502302971052897


    PACKAGE:


    Neutral packing / Our own trademark packing / Your brand OEM packing / Packing according to your requirements.


    DELIVERY TIME:


    We get to start preparing the goods when we receive payment from you. (The goods will be sent between 48 hours to 72 hours if we have in stock. The goods will be sent before the delivery time and the sample will send to you for checking.)

    Quality 6D16 ME074345 High Pressure Oil Pump For MITSUBISHI for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Guangzhou Star Mustang Construction Machinery Parts Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)